Alcatel-Lucent 7210 SAS M - Page 454

System Commands
Page 454 7210 SAS M, T, X, R6 Basic System Configuration Guide
script
Syntax script [script-name] [owner script-owner]
Context show>cron#
Description This command displays cron script parameters.
Parameters schedule-name — Displays information for the specified script.
owner schedule-owner — Displays information for the specified script owner.
Output The following table describes the show cron script output fields.
Sample Output
A:sim1>show>cron# script
===============================================================================
CRON Script Information
===============================================================================
Script : test
Owner name : TiMOS CLI
Description : asd
Administrative status : enabled
Operational status : enabled
Script source location : ftp://*****:******@192.168.15.1/home/testlab_bgp
/cron/test1.cfg
Last script error : none
Last change : 2006/11/07 17:10:03
===============================================================================
A:sim1>show>cron#
Label Description
Script
Displays the name of the script.
Script owner
Displays the owner name of script.
Administrative
status
Enabled — Administrative status is enabled.
Disabled — Administratively abled.
Operational sta-
tus
Enabled — Operational status is enabled.
Disabled — Operationally disabled.
Script source
location
Displays the location of scheduled script.
Last script error
Displays the system time of the last error.
Last change
Displays the system time of the last change.