System Commands
Page 456 7210 SAS M, T, X, R6 Basic System Configuration Guide
System Up Time
The time since the last boot.
SNMP Port
The port number used by this node to receive SNMP request messages
and to send replies.
SNMP Engine ID
The SNMP engineID to uniquely identify the SNMPv3 node.
SNMP Max Message
Size
The maximum SNMP packet size generated by this node.
SNMP Admin State
Enabled — SNMP is administratively enabled and running.
Disabled — SNMP is administratively shutdown and not running.
SNMP Oper State
Enabled — SNMP is operationally enabled.
Disabled — SNMP is operationally disabled.
SNMP Index Boot
Status
Persistent — System indexes are saved between reboots.
Not Persistent — System indexes are not saved between
reboots.
Telnet/SSH/FTP
Admin
Displays the administrative state of the Telnet, SSH, and FTP sessions.
Telnet/SSH/FTP
Oper
Displays the operational state of the Telnet, SSH, and FTP sessions.
BOF Source
The location of the BOF.
Image Source
Primary — Indicates that the directory location for runtime image
file was loaded from the primary source.
Secondary — Indicates that the directory location for runtime
image file was loaded from the secondary source.
Tertiary — Indicates that the directory location for runtime image
file was loaded from the tertiary source.
Config Source
Primary — Indicates that the directory location for configuration
file was loaded from the primary source.
Secondary — Indicates that the directory location for configuration
file was loaded from the secondary source.
Tertiary — Indicates that the directory location for configuration
file was loaded from the tertiary source.
Last Booted Config
File
The URL and filename of the last loaded configuration file.
Last Boot Cfg Ver-
sion
The date and time of the last boot.
Last Boot Config
Header
Displays header information such as image version, date built, date
generated.
Label Description (Continued)
To Next Page
Loading...
Need help?
General
