Alcatel-Lucent 7210 SAS M Configuration Guide

System Commands
Page 482 7210 SAS M, T, X, R6 Basic System Configuration Guide
redundancy
Syntax redundancy
Context show
Description This command enables the context to show redundancy information.
multi-chassis
Syntax multi-chassis
Context show>redundancy
Description This command enables the context to show multi-chassis redundancy information.
all
Syntax all [detail]
Context show>redundancy>multi-chassis
Description This command displays brief multi-chassis redundancy information.
Parameters detail — Shows detailed multi-chassis redundancy information.
Output Show Redundancy Multi-Chassis All Output — The following table describes Redundancy
Multi-Chassis All fields:
Sample Output
B:Dut-B# show redundancy multi-chassis all
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.2
Label Description
Peer IP Address
Displays the multi-chassis redundancy peer.
Description
The text string describing the peer.
Authentication
If configured, displays the authentication key used between this node
and the MC peer.
Source IP Address
Displays the source address used to communicate with the MC peer.
Admin State
Displays the administrative state of the peer.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English