System Commands
Page 490 7210 SAS M, T, X, R6 Basic System Configuration Guide
Show mc-ring ring-node Command Output
Show mc-ring global-statistics Command Output
Label Description
Oper State
Displays the state of the connection verification (both local and
remote).
notProvisioned — Connection verification is not provisioned.
configErr — Connection verification is provisioned but a configu-
ration error prevents it from operating properly.
notTested — Connection verification is administratively disabled
or is not possible in the current situation.
testing — Connection Verification is active, but no results are yet
available.
connected — The ring node is reachable.
disconnected — Connection verification has timed out.
In Use
Displays “True” if the ring node is referenced on an e-pipe or as an
inter-dest-id on a static host or dynamic lease.
Label Description
Rx
Displays the number of MC-ring signalling packets were received by
this system.
Rx Too Short
Displays the number of MC-ring signalling packets were received by
this system that were too short.
Rx Wrong Authen-
tication
Displays the number of MC-ring signalling packets were received by
this system with invalid authentication.
Rx Invalid TLV
Displays the number of MC-ring signalling packets were received by
this system with invalid TLV.
Rx Incomplete
Displays the number of MC-ring signalling packets were received by
this system that were incomplete.
Rx Unknown Type
Displays the number of MC-ring signalling packets were received by
this system that were of unknown type.
Rx Unknown Peer
Displays the number of MC-ring signalling packets were received by
this system that were related to an unknown peer.
Rx Unknown Ring
Displays the number of MC-ring signalling packets were received by
this system that were related to an unknown ring.
To Next Page
Loading...
