Alcatel-Lucent 7210 SAS M - Page 500

System Commands
Page 500 7210 SAS M, T, X, R6 Basic System Configuration Guide
Status : up
DC power : within range
Input power : within range
Output power : within range
===============================================================================
A:7210-SAS-M#
Sample for 7210 SAS-T device
*A:SAST>show# chassis
===============================================================================
Chassis Information
===============================================================================
Name : SAST
Type : 7210 SAS-T 12F10T 4XFP ETR-1
Location :
Coordinates :
CLLI code :
Number of slots : 2
Number of ports : 26
Critical LED state : Red
Major LED state : Off
Over Temperature state : OK
Low Temperature state : OK
Base MAC address : 4c:5f:d2:7d:13:f6
Number of MAC addresses : 16
Hardware Data
Part number : 3HE08117AAAA01
CLEI code :
Serial number : NS1310C2056
Manufacture date : 03252013
Manufacturing string : (Not Specified)
Manufacturing deviations : (Not Specified)
Manufacturing assembly number :
Temperature : 39C
Time of last boot : 2000/05/31 23:24:58
Current alarm state : alarm active
-------------------------------------------------------------------------------
Environment Information
Number of fan trays : 1
Number of fans : 3
Fan tray number : 1
Speed : unknown
Status : failed
-------------------------------------------------------------------------------
Power Supply Information
Number of power supplies : 2
Power supply number : 1
Configured power supply type : ac single
Status : up
AC power : within range
Power supply number : 2