Alcatel-Lucent 7210 SAS M - Page 502

System Commands
Page 502 7210 SAS M, T, X, R6 Basic System Configuration Guide
*A:7210-2# show alarm-contact-input all
===============================================================================
Alarm Contact Input
===============================================================================
Alarm Input Pin Number : 1
Alarm Input Pin Description :
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used : Major
Last State Change : 05/19/2010 11:28:09
Alarm Input Pin Number : 2
Alarm Input Pin Description :
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used : Major
Last State Change : 05/19/2010 11:28:09
Alarm Input Pin Number : 3
Alarm Input Pin Description :
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used : Major
Last State Change : 05/19/2010 11:28:09
Alarm Input Pin Number : 4
Alarm Input Pin Description :
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used : Major
Last State Change : 05/19/2010 11:28:09
===============================================================================
*A:7210-2#
pools
Syntax pools
Context show
Description This command displays information on the buffer allocation and buffer usage per port.
Output pools — The following table describes pools output fields
Label Description
Port
Displays the Port ID of the port
Application
Indicates whether its access, network or access-uplink
buffer pool.
Resv CBS
The amount of CBS reserved per port. 'Sum' indicates it
is the sum of the CBS allocated to each queue on this
port.
MMU Pool Total In Use
Number of system wide buffers in use. This includes
the shared buffers as well as the per queue committed
buffers.