Alcatel-Lucent 7210 SAS M - Page 71

Root Commands
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 71
tree
Syntax tree [detail]
Context <GLOBAL>
Description This command displays the command hierarchy structure from the present working context.
Parameters detail — Includes parameter information for each command displayed in the tree output.
write
Syntax write {user | broadcast} message-string
Context <GLOBAL>
Description This command sends a console message to a specific user or to all users with active console sessions.
Parameters user — The name of a user with an active console session to which to send a console message.
Values Any valid CLI username
broadcast — Specifies that the message-string is to be sent to all users logged into the router.
message-string — The message string to send. Allowed values are any string up to 250 characters
long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.