File System Management
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 93
configuration file, the index file, the sdx file and nvsys.info file will be created on uf1:\
and used subsequently. If the user specified the location of the configuration file in the
BOF as cf2:\, then the configuration file, the index file, the sdx file and nvsys.info file is
created on cf2:\ and used subsequently.
Note: For more information about use of storage locations on 7210 SAS-R6 when using redundant
CPM configuration, see Configuration Guidelines for synchronization of active and standby CPM
on 7210 SAS-R6 on page 214.