IP Router Configuration
7705 SAR OS Router Configuration Guide 107
Parameters start-ip-address — the start address of this range. The address must be unique within the subnet
and specified in dotted-decimal notation.
Values a.b.c.d (host bits must be 0)
end-ip-address — the end address of this range. The address must be unique within the subnet and
specified in dotted-decimal notation
Values a.b.c.d (host bits must be 0)
maximum-declined
Syntax maximum-declined maximum-declined
no maximum-declined
Context config>router>dhcp>local-dhcp-server>pool>subnet
config>service>vprn>dhcp>local-dhcp-server>pool>subnet
Description This command configures the maximum number of addresses that the client can decline from the
server due to the address being in use.
The no form of the command removes the configuration.
Default 64
Parameters maximum-declined — the maximum number of declined addresses allowed
Values 0 to 4294967295
minimum-free
Syntax minimum-free minimum-free
no minimum-free
Context config>router>dhcp>local-dhcp-server>pool>subnet
config>service>vprn>dhcp>local-dhcp-server>pool>subnet
Description This command configures the minimum number of free addresses in this subnet. If the actual number
of free addresses in this subnet falls below the configured minimum, a notification is generated.
The no form of the command removes the configuration.
Default 1
Parameters minimum-free — specifies the minimum number of free addresses in this subnet
Values 0 to 255
To Next Page
Loading...
