IP Router Command Reference
108 7705 SAR OS Router Configuration Guide
default-router
Syntax default-router ip-address [ip-address...(up to 4 max)]
no default-router
Context config>router>dhcp>local-dhcp-server>pool>subnet>options
config>service>vprn>dhcp>local-dhcp-server>pool>subnet>options
Description This command configures the IP address of the default router for a DHCP client. Up to four IP
addresses can be specified.
The no form of the command removes the address(es) from the configuration.
Default n/a
Parameters ip-address — the IP address of the default router. The address must be unique within the subnet
and specified in dotted-decimal notation.
Values a.b.c.d (host bits must be 0)
subnet-mask
Syntax subnet-mask ip-address
no subnet-mask
Context config>router>dhcp>local-dhcp-server>pool>subnet>options
config>service>vprn>dhcp>local-dhcp-server>pool>subnet>options
Description This command specifies the subnet mask option to the client. The mask can either be defined (for
supernetting) or taken from the pool address.
The no form of the command removes the address from the configuration.
Default n/a
Parameters ip-address — the IP address of the subnet mask. The address must be unique within the subnet and
specified in dotted-decimal notation.
Values a.b.c.d (host bits must be 0)
use-gi-address
Syntax [no] use-gi-address
Context config>router>dhcp>local-dhcp-server
config>service>vprn>dhcp>local-dhcp-server
Description This command enables the use of gateway IP address (GIADDR) matching. If the gi-address flag is
enabled, a pool can be used even if a subnet is not found.
To Next Page
Loading...
