Alcatel-Lucent 7705 - Changing the Adapter Card Configuration

IP Router Configuration
7705 SAR OS Router Configuration Guide 141
Router NAT Configuration Commands
zone
Syntax zone zone-id [create]
no zone zone-id
Context config>router
Description This command creates or specifies a security zone within a router context. Each zone must have a
unique ID.
All zones must be explicitly created with the create keyword. If no zones are created within a service
or a router context, a zone will not exist on that object.
Enter an existing zone without the create keyword to edit zone parameters.
The operational state of a zone is relative to the operational state of the port on which the zone is
defined.
The no form of this command deletes the zone with the specified port. When a zone is deleted, all
configuration parameters for the zone are also deleted.
Parameters zone-id — the zone ID number. The zone ID must be unique within the system.
Values 1 to 65534
abort
Syntax abort
Context config>router>zone
Description This command discards changes made to a security feature.
Default n/a
begin
Syntax begin
Context config>router>zone
Description This command enters the mode to create or edit security features.
Default n/a