Alcatel-Lucent 7705 - Removing an Adapter Card

IP Router Command Reference
142 7705 SAR OS Router Configuration Guide
commit
Syntax commit
Context config>router>zone
Description This command saves changes made to security features.
Default n/a
interface
Syntax interface ip-int-name
no interface ip-int-name
Context config>router>zone
Description This command creates a logical IP routing interface for a zone. Once created, attributes such as an IP
address can be associated with the IP interface. Multiple interfaces can be configured on a zone.
The no form of this command removes the IP interface and all the associated configurations.
Parameters ip-int-name — the name of the interface to be configured within the zone
Values 1 to 32 characters (must start with a letter)
name
Syntax name zone-name
no name
Context config>router>zone
Description This command configures a zone name. The zone name is unique within the system. It can be used to
refer to the zone under configure, show, and clear commands.
The no form of the command removes the name.
Parameters zone-name — specifies the name of the zone. Zone names must be unique within the system. If
the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed
within double quotes.
Values 1 to 32 characters (must start with a letter)