Filter Command Reference
346 7705 SAR OS Router Configuration Guide
match
Syntax match [next-header next-header]
no match
Context config>filter>ipv6-filter>entry
Description This command enables the context to enter match criteria for the IPv6 filter entry. When the match
criteria have been satisfied, the action associated with the match criteria is executed.
If more than one match criterion (within one match statement) is configured, all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
58 ipv6-icmp ICMP for IPv6
59 ipv6-no-nxt No Next Header for IPv6
60 ipv6-opts Destination Options for IPv6
80 iso-ip ISO Internet Protocol
88 eigrp EIGRP
89 ospf-igp OSPFIGP
97 ether-ip Ethernet-within-IP Encapsulation
98 encap Encapsulation Header
102 pnni PNNI over IP
103 pim Protocol Independent Multicast
112 vrrp Virtual Router Redundancy Protocol
115 l2tp Layer Two Tunneling Protocol
118 stp Schedule Transfer Protocol
123 ptp Performance Transparency Protocol
124 isis ISIS over IPv4
126 crtp Combat Radio Transport Protocol
127 crudp Combat Radio User Datagram
Protocol ID Protocol Description
Note:
• PTP in the context of IP filters is defined as Performance Transparency Protocol. IP
protocols can be used as IP filter match criteria; the match is made on the 8-bit protocol
field in the IP header.
• PTP in the context of SGT QoS is defined as Precision Timing Protocol and is an
application in the 7705 SAR. The PTP application name is also used in areas such as
event-control and logging. Precision Timing Protocol is defined in IEEE 1588-2008.
To Next Page
Loading...
