Alcatel-Lucent 7705 - Page 471

Route Policies
7705 SAR OS Router Configuration Guide 471
tag
Syntax tag tag
no tag
Context config>router>policy-options>policy-statement>entry>from
Description This command adds an integer tag to the static route. These tags are then matched to control route
redistribution.
The no form of the command removes the tag field match criterion.
Default no tag
Parameters tag — matches a specific external LSA tag field
Values 1 to 4294967295
type
Syntax type type
no type
Context config>router>policy-options>policy-statement>entry>from
Description This command configures an OSPF type metric as a match criterion in the route policy statement entry.
If no type is specified, any OSPF type is considered a match.
The no form of the command removes the OSPF type match criterion.
Parameters type — the OSPF type metric
Values 1 — set as OSPF routes with type 1 LSAs
2 — set as OSPF routes with type 2 LSAs