Alcatel-Lucent 7705 - Page 477

Route Policies
7705 SAR OS Router Configuration Guide 477
The no form of the command disables assigning a next-hop address in the route policy entry.
Default no next-hop
Parameters ip-address — the next-hop IP address in dotted-decimal notation
Values ipv4-prefix a.b.c.d (host bits must be 0)
ipv4-prefix-length 0 to 32
next-hop-self
Syntax [no] next-hop-self
Context config>router>policy-options>policy-statement>default-action
config>router>policy-options>policy-statement>entry>action
Description This command advertises a next-hop IP address belonging to this router even if a third-party next hop
is available to routes matching the policy statement entry.
The no form of the command disables advertising the next-hop-self option for the route policy entry.
Default no next-hop-self
origin
Syntax origin {igp | egp | incomplete}
no origin
Context config>router>policy-options>policy-statement>default-action
config>router>policy-options>policy-statement>entry>action
Description This command sets the BGP origin assigned to routes exported into BGP.
If the routes are exported into protocols other than BGP, this option is ignored.
The no form of the command disables setting the BGP origin for the route policy entry.
Default no origin
Parameters igp — sets the path information as originating within the local AS
egp — sets the path information as originating in another AS
incomplete — sets the path information as learned by some other means