Alcatel-Lucent 7705 - Page 478

Route Policy Command Reference
478 7705 SAR OS Router Configuration Guide
preference
Syntax preference preference
no preference
Context config>router>policy-options>policy-statement>default-action
config>router>policy-options>policy-statement>entry>action
Description This command assigns a route preference to routes matching the route policy statement entry.
If no preference is specified, the default route table manager (RTM) preference for the protocol is used.
The no form of the command disables setting an RTM preference in the route policy entry.
Default no preference
Parameters preference — the route preference expressed as a decimal integer
Values 1 to 255 (0 represents unset, MIB only)
tag
Syntax tag hex-string
no tag
Context config>router>policy-options>policy-statement>default-action
config>router>policy-options>policy-statement>entry>action
Description This command assigns an OSPF tag to routes that do not match any entry (for default action) or that
match the entry (for action). A hexadecimal value of 4 octets can be entered.
The no form of the command removes the tag.
Default no tag
Parameters hex-string — assigns an OSPF tag
Values OSPF: [0x0...0xFFFFFFFF]H
type
Syntax type type
no type
Context config>router>policy-options>policy-statement>default-action
config>router>policy-options>policy-statement>entry>action
Description This command assigns an OSPF type metric to routes that do not match any entry (for default action)
or that match the entry (for action). The no form of the command disables assigning an OSPF type in
the route policy entry.