Displaying Static Link Aggregation Configuration and Statistics Configuring Static Link Aggregation
page 6-12 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
For example, to display detailed statistics for port 1 in slot 2 that is attached to static link aggregate group
1, enter:
-> show linkagg port 4/1
A screen similar to the following would be displayed:
Static Aggregable Port
SNMP Id : 2001,
Slot/Port : 4/1,
Administrative State : ENABLED,
Operational State : UP,
Port State : ATTACHED,
Link State : UP,
Selected Agg Number : 1,
Port position in the aggregate : 0,
Primary port : YES
Note. See the “Link Aggregation Commands” chapter in the OmniSwitch CLI Reference Guide for
complete documentation of show commands for link aggregation.
To Next Page
Loading...
