Configuring BFD Configuring BFD
page 16-22 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
Legend: + indicates routes in-use
b indicates BFD-enabled static route
r indicates recursive static route, with following address in brackets
Total IPRM IPv4 routes: 7
Destination Gateway Interface Protocol Metric Tag Misc-Info
-------------------+---------------+------------+--------+-------+-----+-----------
+b 100.0.0.0/8 100.1.1.10 v1001 STATIC 1 0
+ 128.251.40.0/24 172.28.4.254 EMP STATIC 1 0
Inactive Static Routes
Destination Gateway Metric
--------------------+-----------------+---------
To Next Page
Loading...
