Allen-Bradley Rockwell Automation 1734-AENT User Manua

Publication 1734-UM011A-EN-P - February 2004
1734-AENT Quick Start D-5
We are going to assume there is an analog input module 1734-IE2V,
which resides in slot 3.
3. Click on the configuration tag remote_POINT_IO:3:C.
From here you can set the entire module’s configuration, alarms, etc.
In this configuration window, you enter the values that would
correspond to the desired range. According to Appendix C of this user
manual, the range type default value for a 1734-IE2V module is 2, which
is equal to 0-10VDC.
4. Click on the configuration tag for the module in slot 4,
remote_POINT_IO:4:C.
5. Check the value in the tag remote_POINT_IO:4:C.Ch0RangeType.

Allen-Bradley Rockwell Automation 1734-AENT Specifications

General

Model	1734-AENT
Category	Network Hardware
Type	EtherNet/IP Adapter
Ethernet Ports	2
IP Addressing	Static or DHCP
Network Address	Configurable via software
Mounting	DIN rail
Number of Ports	2
Port Type	RJ45
Communication Protocol	EtherNet/IP
Manufacturer	Rockwell Automation
Power Supply	24V DC
Enclosure	Open-style