Name: Allen-Bradley Rockwell Automation 1734-AENT
Brand: Allen-Bradley
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Publication 1734-UM011A-EN-P - February 2004

D-6 1734-AENT Quick Start

It is set to 1, which is one of the default values. If you look to Appendix

C of this user manual, you will see that there are two settings that this

module will support:

• 1 = 0 to 10VDC

• 3 = -10 to +10VDC

Please note the following:

• The controller only sends the configuration data when connection is

being established.

• Should you need to modify any of the tag values once you change the

tag, you will need to access the updated information and download it

into the module. There are three ways to download the updated

configuration information into the module.

– Ideally, you would enter the correct code number in the Range Type

field at the same time that you add the I/O to the I/O Configuration

tree. You would then download later

Other manuals for Allen-Bradley Rockwell Automation 1734-AENT

Questions and Answers:

Need help?

Do you have a question about the Allen-Bradley Rockwell Automation 1734-AENT and is the answer not in the manual?

General