Allen-Bradley Rockwell Automation 1734-AENT User Manua

Publication 1734-UM011A-EN-P - February 2004
Index 3
RSLinx communication drivers B--4, B--6
AB_ETH, ETHIP driver B--2–B--4,
B--6
installing the software B--1
RSLogix 5000 data types
valid number ranges
C--2
S
safety approvals 7--1
set the network address 2--3
specifications 7--2
subnet mask 3--4–3--5
T
terminology Preface-6–Preface-8
W
web pages A--1–A--10
browse chassis A--7
configuration page A--8
diagnostic information A--2
what the adapter does 1--5
who should use this manual Preface-1
wiring the adapter 2--4

Allen-Bradley Rockwell Automation 1734-AENT Specifications

General

Model	1734-AENT
Category	Network Hardware
Type	EtherNet/IP Adapter
Ethernet Ports	2
IP Addressing	Static or DHCP
Network Address	Configurable via software
Mounting	DIN rail
Number of Ports	2
Port Type	RJ45
Communication Protocol	EtherNet/IP
Manufacturer	Rockwell Automation
Power Supply	24V DC
Enclosure	Open-style