336 Rockwell Automation Publication 1783-UM007G-EN-P - February 2017
Chapter 7 Configure Switch Features
Table 89 - Customize EIGRP Parameters
Field Description
EIGRP ID (Not editable). Displays the Autonomous System (AS) number of the EIGRP routing process.
Auto-Summary Check the checkbox to allow the automatic summarization of subnet routes into network-level routes. This feature is disabled by default (the
software sends subprefix routing information across classful network boundaries). EIGRP summary routes are given an administrative distance
value of 5. You cannot configure this value.
Administrative Distance
Internal Distance Type an administrative distance for EIGRP internal routes. Internal routes are routes that are learned from another entity within the same
autonomous system.
Valid values: 1…255
Default: 90
External Distance Type an administrative distance for EIGRP external routes. External routes are routes for which the best path is learned from a neighbor external to
the autonomous system.
Valid values: 1…255
Default: 170
Metrics
Bandwidth Type the minimum bandwidth of the route in kilobits per second.
Valid values: 1…4294967295
Loading Type a number that represents the effective bandwidth of the route.
Valid values: 1…255 where 255 is 100 percent loading
Reliability Type a number that represents likelihood of successful packet transmission.
Valid values: 0…255 where 255 means100 percent reliability; 0 means no reliability
To Next Page
Loading...
