Allied Telesis AT-8000S Series User Manual

Managing System Files
Defining TFTP File Uploads and Downloads
Page 143
– Boot — Downloads or uploads the Boot file.
Note
The configuration file is copied only to the Master Unit, since this unit controls the entire stack. The
configuration file is automatically synchronized with the configuration file on the Backup Unit, so that in the
event of failure of the Master Unit, the Backup Unit takes over immediately with the same configuration
information.

Allied Telesis AT-8000S Series Specifications

General

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Humidity	5% to 95% non-condensing
Switching Capacity	104 Gbps
Forwarding Rate	77.4 Mpps
VLANs	4, 094
Layer 3 Features	Static routing, RIP v1/v2
Management	Web-based
Operating Humidity	10% to 90% non-condensing