Page 144
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
To download or upload TFTP Files:
1. Select the TFTP Operation type: upload or download
1. Define the fields.
2. Select the Boot Type.
3. Click Apply.
The Firmware Copy section of the File System Page contains the following fields:
• Copy Master Firmware —Copies the Firmware from the the Stacking Master.
• Source — Specifies the file to be copied.
– Software Image — Downloads the Image file.
– Boot Code — Downloads the Boot file.
• Destination Unit — Downloads firmware to the designated unit. The values are:
– Unit — Copies the Firmware to a specific stacking member. The possible field values are stacking
members 3-6, and backup.
– All — Copies the Firmware to all stacking member.
To copy firmware:
1. Click Copy Master Firmware. The copy firmware parameters are activated.
2. Select the Source and the Destination Unit.
3. Click Apply.
The Configuration Copy section of the File System Page contains the following fields:
• Copy Configuration— Allows the copy configuration operation.
• Source File Name — Specifies the configuration files to be copied.
– Running Configuration — Copies the Running Configuration file.
– Startup Configuration — Copies the Startup Configuration file, and overwrites the old Startup
Configuration file.
– Backup Configuration — Copies the Backup Configuration file.
• Destination File Name — Specifies the destination file to which the configuration file is copied. The possible
field values are:
– Running Configuration — Downloads commands into the Running Configuration file.
– Startup Configuration — Downloads the Startup Configuration file, and overwrites it.
– Backup Configuration — Downloads the Backup Configuration file, and overwrites it.
To copy configuration:
1. Click Copy Configuration. The copy configuration parameters are activated.
2. Select the Source file and the Destination file.
3. Click Apply.
To Next Page
Loading...
Need help?
General
