EasyManua.ls Logo

Allworkx Verge - System Extensions

Allworkx Verge
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Allworx
®
Verge™ IP Phone Series User Guide
Page 26 866.ALLWORX * +1 585 421 3850
www.allworx.com
Version: D Revised: June 1, 2017
To manage the Call History listings.
1. Press the Calls soft key. Use the up/down navigation buttons to highlight the Call History listing.
2. Use the displayed soft keys to manage the listing.
3.13 System Extensions
Dial the digits in the table below for a system extension. If the call does not complete, check the phone
functions tab of the My Allworx Manager page or contact the Allworx Server Administrator for the
actual dialed digits. If Cell Phone Dialing is enabled, press the send ( ) soft key to complete the call.
Call place a call to the selected Call History listing.
Select selects the highlighted Call History listing from the Call History list. New soft keys are available:
Select All - choses all the Call History listings.
Clear All - unselects all the Call History listings.
Delete remove the highlighted Call History listing from the Call History list. Use the Delete soft key only
removes the Call History listing from the Verge IP phone and Interact application Call History.
The Reach application is not affected.
Contact display the Contact details (available for calls from current contacts only). Available in the Call
History > Details phone screen.
Add Contact opens the phone screen to add a new contact (available for callers not in the Contacts). Available
in the Call History > Details phone screen.
Number Access
0 Initiate a call to the company operator.
3 + extension Connect to another users voicemail and leave a message.
402 Connect to an Overhead Paging System to make an announcement.
403 Activate the door relay, if connected and configured.
404 Access to the Audio Message Center.
408 Access the Conference Center. To set up a new conference, use My Allworx Manager.
4301 to 4332 Connect to an Auto Attendant - *400 is the default Auto Attendant. The number of Auto
Attendants is dependent upon the Allworx server.
45 + extension Forward calls to another extension. To disable, dial 450.
46# Connect to a Paging Zone to broadcast audio (# is a Page Zone number 0 through 9).
4950 to 4999 Retrieve a call from the assigned parking orbit.
701 to 709 Retrieve a call from the assigned parking orbit.
6 + extension Access the Audio Message Center from any Allworx phone.
7 + extension Answer another ringing phone.
9 + phone number Access outside line.