Allworx Verge IP Phone Series User Guide
866.ALLWORX * +1 585 421 3850 Page 75
www.allworx.com
Version: D Revised: June 1, 2017
5.6 Reboot Phone
On occasion, it may be necessary to reboot the phone. For example, when the Allworx Server
Administrator makes changes to the phone configuration.
1. Follow the steps in “To access the setting options:” on page 65. Open Reboot Phone.
2. Select the Yes soft key on the confirmation prompt to reboot.
5.7 Ring Type Families
Ring Types
Enable phones connected to the Allworx server to be set to ring with different patterns and tones to:
• Differentiate between incoming internal calls and incoming external calls.
• Identify calls from a specific caller ID.
• Differentiate between the lines for the incoming call (including calls on certain Call Appearances,
Line Appearances, or ACD queues).
• Help multiple users in a shared space identify which phone is ringing.
Ring Type Family
A group of ring types of the same frequency (default is Family 6). The Allworx system provides eight
Ring Type Families with eight Ring Types within each family. The Allworx Server Administrator chooses
the Ring Type used on the phones in the extension and programmable button definitions. Verge IP
phone users can choose the family from which the selected Ring Types. The appearance programmable
button Ring Type setting overrides any call route specific Ring Type choices unless the appearance
programmable button Ring Type is set to Auto.
Do not reboot the phone unless instructed to do so by the Allworx Server Administrator or when
indicated while changing the phone configuration.
Family Frequency Range of Pitches A through D
Family 1 Default Frequencies
Family 2 Middle Frequencies
Family 3 High Frequencies
Family 4 Very High Frequencies
Family 5 Varying Frequencies
Family 6 Recorded ring types with a melodic theme
Family 7 Recorded ring types with a modern theme
Family 8 Recorded ring types with a traditional theme
To Next Page
Loading...