Allworx Verge IP Phone Series User Guide
866.ALLWORX * +1 585 421 3850 Page 29
www.allworx.com
Version: D Revised: June 1, 2017
To perform a call handoff:
1. Press the Handoff soft key.
If there is only one possible destination device, the Allworx system automatically transitions the
call to the destination device.
If multiple destination devices are available to receive the call handoff, use the up/down
navigation and Select button to select the receiving device and transition the call.
During a call handoff to an other devices:
• the previously used audio path on the destination device automatically becomes active.
• the Reach device switches to Remote Control Mode, if handing the call off to a Verge IP
phone. See “Reach Remote Control” on page 55 for more information.
2. Listen for the tones to indicate:
• the call handoff from the current device was successful.
• the call handoff to the new device was successful.
• if the call handoff fails.
Soft Keys
Cancel dismiss the Call Handoff feature.
Dismiss returns to the Verge IP phone Idle screen when the other party has hung up.
Add Contact opens the phone screen to add a new contact (available for callers not in the Contacts). See “Add
Contact” on page 36 for more information.
To Next Page
Loading...