Allworkx Verge - Page 45

To Next Page

To Previous Page

Allworx Verge IP Phone Series User Guide

866.ALLWORX * +1 585 421 3850 Page 35

www.allworx.com

Version: D Revised: June 1, 2017

To manage contacts:

Settings available:

• add a new Personal Contact

• set contact favorite status

• select the preferred contact number (for personal contacts with more than one phone number)

• update the Allworx Personal Contact information (Allworx Personal Contacts only)

1. Press the Contacts ( ) function button. If necessary, enter the Extension and PIN information and

press the Done soft key. The Contact listing screen displays.

2. Do one of the following:

• Use the up/down navigation buttons to locate the contact listing, and then press the

Select button. The Contact Details screen displays. To filter the contacts, press the More

( ) function button, and then the Groups soft key to select the contacts types to display.

• Use the keypad to enter search criteria. The digits entered display in the header (right

side) and the Verge IP phone displays the contacts matching the number and all

associated letters with the pressed key.

Press the left navigation arrow to delete the last entered digit. To recover the full list of

contacts, delete all of the digits entered.

• Press the Add Contact soft key to add a Personal Contact.

3. Use the following soft keys to manage the contact.

Contacts Programmable Button LED

off Contact is idle and does not have DND active (Allworx User only).

solid amber Contact is idle and has DND active (Allworx User only).

flashes red Contact has an incoming call (Allworx User only).

solid red Contact is on the phone (Allworx User only).

Note:

Each Allworx user can add a contact image associated with their contact information using the Reach

application (with or without a handset license) or the Interact Professional application.