MU-100A
17. Calibration
17-1
17. Calibration
Regular calibration is required to maintain the MU-100A performance.
Calibration is conducted at our facility.
For calibration, please send your displacement sensor and force sensor together with
the MU-100A. Depending on the operating environment, the extent of deterioration
varies from one MU-100A to another. Therefore, the MU-100A must be calibrated
together with the displacement sensor and the force sensor as a set.
To issue a calibration certificate such as traceability, we conduct calibration at our site
with charge.
For more information about calibration, contact us.
To Next Page
Loading...
