MU-100A
2. Features
2-1
2. Features
The Head Controller MU-100A is a controller that moves the welding head up and down
with monitoring the weld force and displacement.
MU-100A offers the following features:
• Measures weld force before/after welding
Measures weld force before welding, and outputs the start signal to the welding
machine with an optional load cell. Also, measures workpiece thickness after welding,
and outputs the judgment signal.
• Measures workpiece thickness before welding, displacement and final
workpiece thickness after welding
Measures workpiece thickness before welding, and outputs the start signal to the
welding machine with an optional displacement sensor. Also, measures displacement
and workpiece thickness after welding, and outputs the judgment signal.
• Controls moving up and down of the welding head
Controls the valve of the welding head by the time.
• Managing measurement data and settings with PC
You can transmit measurement data to your PC through the Ethernet, RS-232C or
RS-485 interface. Also, you can transmit and receive the setting of MU-100A.
• Supports a wide range of welding machines
The instrument supports single-phase AC, DC inverter, AC inverter, and transistor
welding machines.
• Supports the series or indirect head
Supports the series head or indirect head with up to 4 inputs (option) including 2
inputs of weld force and 2 inputs of displacement.
• Supports multiple conditions
Up to 127 schedules can be stored.
To Next Page
Loading...
