Ammann AP 240 - Page 47

41AP 240
OPERATION MANUAL
Driver’s Position
1 - Ignition Box
2 - Travel Controller
3 - Tire Ination - optional *
4 - Tire Deation - optional
5 - Gearbox Lubrication Pressure Gauge
6 - Gearbox Thermometer
7 - Power View Display
8 - Brake Circuit Pressure Gauge
9 - Tire Pressure Gauge - optional
10 - TOTAL STOP Pushbutton
11 - Enabled Workplace Signalling
12 - Sprinkling Switch and Interval Control
13 - Engine ECM Diagnostics Socket
14 - Trimmer
15 - Direction-indicator lights
16 - Fuses
17 -Hand Lamp Socket
18 - Bonnet Lock to Unlock
19 - Acoustic Alarm for Brake Failure
20 - Ventilation Nozzles
21 - Accelerator Pedal - controls engine rpms - travel speed
22 - Brake Pedal - controls rear wheel brakes
A - Indicator Lamps
23 - Battery Recharging
24 - Parking brake
25 - Engine heating
26 - Hydraulic oil lter fouled
27 - Idle
28 - Direction - indicator lights
29 - Hydraulic oil level
30 - Brake failure
31 - Hydraulic oil overheated
32 - Air lter fouled
33 - Tire sprinkling
B - Switches
34 - Headlamps
35 - Rear lights
36 - Warning lights
37 - Hazard beacon
38 - Parking brake
39 - Dierential interlock
40 - Idle RPM - stepping of engine idling
* - With the standard version of the Machine the valve has been replaced with the end piece to connect hose incl. pressure gauge
for manual tire ination (part of the equipment). For others, please refer to Maintenance Manual.