374009
I
II
III
IV
0
23
24
25
26
27
28
29
30
31
32
33
Brake failure (30) - indicates air pressure low-
ered in the circuit below 5,2 bar - simultaneously
with audio alarm.
After starting up, the pilot lamp is turned on un-
til the sucient pressure in the brake circuit is
achieved.
If the pilot lamp turns on during driving, stop the
machine. Before driving the machine again, it is
necessary to repair the failure.
Hydraulic oil overheated (31) - indicates max
temperature admissible (reduce power, cool
down).
Air lter fouled (32) - indicates necessity to re-
place lter element.
Tire sprinkling (33) - sprinkling pump turned
ON.
Note:
Compressor air intake leads to the lter.
To Next Page
Loading...
