Firmware Pages and Descriptions
103
Modero VG Series Touch Panels - Instruction Manual
Panel Information Page
The Panel Information page (FIG. 102) centers around Modero panel properties such as the resolution used, on-board memory,
firmware, address/channel information, and string information.
The elements of the Panel Information page are described in the table below:
FIG. 102
Panel Information page (takes its’ information from the touch panel)
Panel Information Page Elements
Back: Returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of the panel’s
connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently secured target
Master (requiring a username and password).
Panel Type: Displays the model of the Modero panel being used.
Firmware Version: Displays the G4 firmware version being used by the panel.
• Verify you have the latest version from www.amx.com.
Setup Port: Displays the setup port information/value being used by the panel.
High Port: Displays the high port (port count) value for the panel.
High Address: Displays the high address (address count) value for the panel.
High Channel: Displays the high channel (channel count) value for the panel.
High Level: Displays the high level (level count) value being used by the panel.
Serial Number: Displays the specific serial number value assigned to the panel.
Setup Pages Version: Displays the type and version of the Setup pages being used by the panel.
Screen Width: Displays the pixel width being used to display the incoming video signal on the Modero panel.
• Maximum available screen width on 12" panels is 800 pixels.
• Maximum available screen width on 15" panels is 1024 pixels.
• Maximum available screen width on 17" widescreen panels is 1280 pixels.
Screen Height: Displays the pixel height being used to display the incoming video signal on the Modero panel.
• Maximum available screen height on 12" panels is 600 pixels.
• Maximum available screen height on 15" and 17" panels is 768 pixels.
Screen Refresh Rate: Displays the video refresh rate applied to the incoming video signal from the panel.
Screen Rotation: Displays the degree of rotation applied to the on-screen image.
Power Up Pages: Displays the first touch panel page assigned for display after the device is powered-up.
• This information is taken from the TPD4 project file.
• Most projects begin with a Main page.
Start Up String: Displays the start-up string.
Wake Up String: Displays the wake up string used after an activation from a timeout.
Sleep String: Displays the sleep string used during a panel’s sleep mode.
File System: Displays the amount of Compact Flash memory available on the Modero panel.
RAM: Displays the available RAM (or Extended Memory module) on the Modero panel.
Panel Start Time Displays the last time the panel was started from an "Off" state.
This information is retrieved from
the Modero panel
To Next Page
Loading...
