AMX NXD-1700VG - Sta; Tec

Programming
169
Modero VG Series Touch Panels - Instruction Manual
Button Query Commands (Cont.)
?STA Get the current XML panel stats. Returned in MULTIPLE Custom events (size of strings are limited per message). Values in Custom
event will say for example, 1 of 5 messages and how many total bytes of XML data.
Value 1 = 1 (which one of multiple events is this (1 based))
Value 2 = 5 (total number of events required to send this string)
Value 3 = total size in bytes of string
Text = X ML ou t pu t (1 o f 5 )
total XML output looks like....
<?XML version="1.0" ?>
<PanelStats>
<Icsp>
<Total><Rx>11</Rx><Proc>11</Proc><Drop>0</Drop></Total>
<Rolling><Rx>11</Rx><Proc>11</Proc><Drop>0</Drop></Rolling>
</Icsp>
<Blink>
<Total><Rx>3</Rx><Miss>0</Miss></Total>
<Rolling><Rx>3</Rx><Miss>0</Miss></Rolling>
</Blink>
<Ethernet>
<RxPackets>53063571</RxPackets><RxErrors>0</RxErrors>
<RxDrops>0</RxDrops><RxOverRuns>0</RxOverRuns><RxFrames>63</RxFrames>
<TxPackets>17842136</TxPackets><TxErrors>0</TxErrors><TxDrops>0</TxDrops>
<TxOverRuns>0</TxOverRuns><TxCarriers>0</TxCarriers>
<Collisions>0</Collisions><TxQueueLen>100</TxQueueLen>
<RxBytes>292901735</RxBytes><TxBytes>1182103211</TxBytes>
</Ethernet>
<Wireless>
<Mode>Managed</Mode><Frequency>2.46
?TEC Get the current text effect color.
Syntax:
"'?TEC-<vt addr range>,<button states range>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
custom event type 1009:
Flag - Zero
Value1 - Button state number
Value2 - Actual length of string (should be 9)
Value3 - Zero
Text - Hex encoded color value (ex: #000000FF)
Text length - Color name length (should be 9)
Example:
SEND COMMAND Panel,"'?TEC-529,1'"
Gets the button 'OFF state' text effect color information. The result sent to the Master would be:
ButtonGet Id = 529 Type = 1009
Flag = 0
VALUE1 = 1
VALUE2 = 9
VALUE3 = 0
TEXT = #5088F2AE
TEXT LENGTH = 9