Firmware Pages and Descriptions
106
Modero VG Series Touch Panels - Instruction Manual
Audio Settings Page
The Audio Settings page (FIG. 105) allows you to adjust the master volume parameters and default panel sounds on the panel.
The elements of the Audio Settings page are described in the table below:
Supported sampling rates for WAV
The following is a listing of supported sampling rates associated for WAV files played on these panels. Some WAV files currently
played on Modero's may not work on these panels. The supported sampling rates for WAV files are:
FIG. 105
Audio Settings page
Audio Settings Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of the panel’s
connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently secured target
Master (requiring a username and password).
Master Volume: This section allows you to alter the current master volume level:
• Use the UP/DN buttons to adjust the volume level (range = 0 - 100).
• The Master Volume bargraph indicates the current volume level.
•The Mute button toggles the Mute feature.
•The Play Test button plays a test WAV/MP3 file over the panel’s internal speakers.
Default Panel Sounds: Sets the Modero panel to play either the default Button Hit sound (when you touch an active button) and/or
the default Button Miss sound (when you touch a non-active button or any area outside of the active button).
The buttons below the Button Hit and Button Miss buttons list the chosen sound files for each action. These
files are customizable within TPDesign4. The Information icon opens a window (FIG. 106) that goes into more
detail on the sound file options.
Internal Sound Level: This section allows you to adjust the current sound level on the internal panel speaker:
• Use the UP/DN buttons to adjust the volume output on the internal speakers (range = 0 - 100).
• The Internal Sound Level bargraph indicates the current sound level.
•The Mute button mutes the volume.
Line In Level: Allows you to adjust the current Line-In volume level (being received from the communicating breakout box).
• Use the UP/DN buttons to adjust the Line-In volume level (range = 0 - 100).
• The Line-In Level bargraph indicates the current Line-In level.
•The Mute button mutes the Line-In volume.
Mic Out Level: Allows you to adjust the current Microphone volume level (being received from the communicating breakout
box).
• Use the UP/DN buttons to adjust the Microphone volume level (range = 0 - 100).
• The Mic Out Level bargraph indicates the current Mic Out level.
Supported WAV Sampling Rates
• 48000 Hz • 16000 Hz
• 44100 Hz • 12000 Hz
• 32000 Hz • 11025 Hz
• 24000 Hz • 8000 Hz
•22050 Hz
To Next Page
Loading...
