Firmware Pages and Descriptions
108
Modero VG Series Touch Panels - Instruction Manual
The elements of the Video Settings page are described in the table below:
Video - RGB Settings Page
The RGB Settings page (FIG. 109) sets the RGB properties for the detected NXA-RGB card located within the target panel on Slot 2
where pass-thru occurs.
The elements of the RGB Settings page are described in the table below:
Video Settings Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of the panel’s
connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently secured target
Master (requiring a username and password).
Settings: • The Default Settings button sets the video settings to their default values (indicated in this table).
•The Undo Changes button disregards any changes made on the page since the last settings were saved.
•The Save Settings button saves any changes made to this page.
Video Settings: • The Black & White button toggles the Black & White display mode. Default = Off.
•The Sharpness button toggles the Interpolate (Sharpness) feature. Default = On.
•The Interlace button toggles the Interlacing feature. Default = On.
Status: Displays whether or not a video-sync signal is detected.
Format: Allows you to press this blue field and cycle through a choice of available video formats (NTSC, PAL, SECAM, or
Auto detect).
•Default = Auto.
Brightness: Use the UP/DN buttons to alter the brightness level of the incoming signal.
• Range = 0 - 255, default = 128.
Contrast: Use the UP/DN buttons to alter the contrast level of the incoming signal.
• Range = 0 - 255, default = 128.
Saturation: Use the UP/DN buttons to alter the color saturation level of the incoming signal.
• Range = 0 - 255, default = 128.
Hue: Use the UP/DN buttons to alter the hue level of the incoming signal.
• Range = 0 - 255, default = 128.
FIG. 109 RGB Adjustment page (showing the default values)
RGB Settings Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of the panel’s
connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently secured target
Master (requiring a username and password).
Settings: • The Default Settings button sets the RGB settings to their default values (indicated in this table).
•The Undo Changes button disregards any changes made on the page since the last settings were saved.
•The Save Settings button saves any changes made to the RGB Adjustment page.
•The Sync on Green button sets the NXA-RGB card to search for the sync signal on Green signal.
Version: Displays the firmware version being used by the internal NXA-RGB card.
BOB Version: Displays the firmware version of the communicating NXA-AVB/RGB Breakout Box.
• If firmware is updated to either the panel or the breakout box, both units must be power-cycled for the
panel to detect and display the BOB firmware version.
Incoming signal shown in the background
Once you are done making your
adjustments, click SAVE SETTINGS.
Firmware version of the NXA-RGB card
Pressing this area activates the
Full Screen Edit mode
Firmware version of the NXA-AVB/RGB
To Next Page
Loading...
