Firmware Pages and Descriptions
105
Modero VG Series Touch Panels - Instruction Manual
Time & Date Settings Page
The Time & Date Settings page (FIG. 104) allows you to alter/set the time and date information on the NetLinx Master. If either the
Time/Date is modified on this page (then updated to the Master by pressing the Set Time button), all devices communicating to that
target Master will then be updated to reflect the new information.
NOTE: The only way to modify a panel’s time, without altering the Master, is to use NetLinx code.
The elements of the Time & Date Settings page are described in the table below:
NOTE: Modero touch panels do not have an on-board clock. This page both receives and sets the time/date of the NetLinx Master.
FIG. 104
Time and Date Settings page
Time & Date Settings Page Elements
Back: Returns you to the previously active touch panel page without saving changes (to save changes, use the Set
Time button).
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of the panel’s
connection status regardless of what page is currently active.
A Lock only appears on the icon if the panel has established a connection with a currently secured target
Master (requiring a username and password).
Time Date Refresh/Set: This section provides you with two options:
•The Ge t T i m e / D at e button retrieves the Time and Date information from the Master.
•The Set Time/Date button sets the Master to retain and save any time/date modifications made on the Time
and Date Setup page.
Time Display fields: These fields display the time in three formats: STANDARD, STANDARD AM/PM, and 24 HOUR.
Date Display fields: These fields display the calendar date information in several different formats.
Set Date/Time: This section provides a user with both UP/DN arrow buttons to alter the Master’s calendar date and time. The
blue circle indicates which field is currently selected.
• Select the Year field and use the UP/DN buttons to alter the year value
(range = 2000 - 2037).
• Select the Month field and use the UP/DN buttons to alter the month value
(range = 1 - 12).
• Select the Day field and use the UP/DN buttons to alter the day value
(range = 1 - 31).
• Select the Hour field and use the UP/DN buttons to alter the hour value
(24-hour military).
• Select the Minute field and use the UP/DN buttons to alter the minute value
(range = 0 - 59).
• Select the Second field and use the UP/DN buttons to alter the second value
(range = 0 - 59).
Time Display
fields
Date Display
fields
Currently
selected
To Next Page
Loading...
