AMX NXD-1700VG - ?Jsi; Jsi; Mac; Mut

Programming
168
Modero VG Series Touch Panels - Instruction Manual
Button Query Commands (Cont.)
?JSI Get the current icon justification.
Syntax:
"'?JSI-<vt addr range>,<button states range>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
custom event type 1006:
Flag - Zero
Value1 - Button state number
Value2 - 1 - 9 justify
Value3 - Zero
Text - Blank
Text length - Zero
Example:
SEND COMMAND Panel,"'?JSI-529,1'"
Gets the button 'OFF state' icon justification information. The result sent to the Master would be:
ButtonGet Id = 529 Type = 1006
Flag = 0
VALUE1 = 1
VALUE2 = 6
VALUE3 = 0
TEXT =
TEXT LENGTH = 0
?JST Get the current text justification.
Syntax:
"'?JST-<vt addr range>,<button states range>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
custom event type 1004:
Flag - Zero
Value1 - Button state number
Value2 - 1 - 9 justify
Value3 - Zero
Text - Blank
Text length - Zero
Example:
SEND COMMAND Panel,"'?JST-529,1'"
Gets the button 'OFF state' text justification information. The result sent to the Master would be:
ButtonGet Id = 529 Type = 1004
Flag = 0
VALUE1 = 1
VALUE2 = 1
VALUE3 = 0
TEXT =
TEXT LENGTH = 0
?MAC Get the MAC addresses. Returned in Custom event.
Text=Wired:00:60:9F:91:07:63,Wireless:00:02:E3:42:C9:58
Note: If only one MAC is available, then only one will be listed (without a comma).
?MUT Get the Mute function. Returned in Custom event
Value1=button state(0=off, 1=on)
?PIF Get the current Panel Information. Returned in Custom event.
Text=<Filesystem Info>,<RAM Info>,<Panel Start Time>