Anritsu MF2412B - 9.3 Repackaging and Transporting

9-3
9.3 Repackaging and Transporting
9.3 Repackaging and Transporting
Note the following information when sending this unit to Anritsu for repairs.
9.3.1 Repackaging
Use the packaging materials and box the unit originally came with. If they are not available, use the following materials:
(1) Wrap the unit in plastic or similar material.
(2) Obtain a cardboard or aluminum box large enough to hold material for absorbing physical shock from all sides.
(3) Fill the box on all sides with material for absorbing physical shock so that the unit will not move within the box.
(4) Seal the box shut tight with plastic bands, adhesive tape, or other suitable means.
9.3.2 Transporting
Transport by avoiding vibrations as much as possible and fulfilling the conditions recommended above.