Section 2 Before Using
2-10
.
CAUTION
If you run out of spare fuses, obtain new ones that have the same ratings as the
one that originally came with the unit.
• If you do not get the same type of fuse, you may experience problems such
as not being able to install it, problems connecting it, or delays in blowout.
• If you get a fuse with a voltage rating that is too high, it may not blow out
the next time there is a problem, putting the unit at risk of catching on fire.
After following the safety measures covered so far, replace the fuse as described below.
Step
1
2
3
4
Turn the power line switch off on the back panel. Make sure that the front panel LCD and all LEDs
go out.
Remove the fuse holder shown below.
Remove the fuse from the holder, and replace it with a new one.
Replace the fuse holder to its original position.
Fuse Replacement Procedure
Fuse holder
Note 1 :
If you do not have a replacement fuse, order one from our service department. Provide us with the model name
and number, part name, and quantity you need.
To Next Page
Loading...