Areca ARC-1222 - Upgrading Firmware Through CLI

133
APPENDIX
A:\nash
Raid Controller Flash Utility
V1.11 2007-11-8
Command Usage:
NFLASH FileName
NFLASH FileName /cn --> n=0,1,2,3 write binary to controller#0
FileName May Be ARC1680FIRM.BIN or ARC1680*
For ARC1212* Will Expand To ARC1212BOOT /FIRM/BIOS.BIN
A:\>nash arc1212~1.bin
Raid Controller Flash Utility
V1.11 2007-11-8
NODEL : ARC-1212
MEM FE620000 FE7FF000
File ARC121~1.BIN : >>*** => Flash 0K
Upgrading Firmware Through CLI
This Command Line Interface (CLI) provides you to congure and
manage the Areca SAS RAID controller components in Windows,
Linux, FreeBSD and more environments. The CLI is useful in
environments where a graphical user interface (GUI) is not
available. Through the CLI, you perform rmware upgrade that you
can perform with the McRAID storage manager GUI. From rmware
version 1.43 and CLI version 1.72.250 beginning, the controller has
added the rmware update through the CLI on the controller.
To update the controller rmware, follow the procedure below:
Parameter:<path=<PATH_OF_FIRMWARE_FILE>>
Fn: Firmware Updating.
Ex: Update Firmware And File Path Is In [C:\FW\ARC1110FIRM.BIN.]
Command: sys updatefw path=c:\fw\arc1212rm.bin [Enter]