EasyManua.ls Logo

Areca ARC-1222 - HDD Read Ahead Cache; Stagger Power on

Areca ARC-1222
167 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BIOS CONFIGURATION
69
3.7.5.7 HDD Read Ahead Cache
Allow Read Ahead (Default: Enabled)—When Enabled, the
drive’s read ahead cache algorithm is used, providing maximum
performance under most circumstances.
3.7.5.8 Stagger Power On
In a PC system with only one or two drives, the power can sup-
ply enough power to spin up both drives simultaneously. But in
systems with more than two drives, the startup current from
spinning up the drives all at once can overload the power supply,
causing damage to the power supply, disk drives and other sys-
tem components. This damage can be avoided by allowing the
host to stagger the spin-up of the drives. The SAS/SATA drives
have support stagger spin-up capabilities to boost reliability.
Stagger spin-up is a very useful feature for managing multiple
disk drives in a storage subsystem. It gives the host the abil-
ity to spin up the disk drives sequentially or in groups, allowing
the drives to come ready at the optimum time without straining
the system power supply. Staggering drive spin-up in a multiple
drive environment also avoids the extra cost of a power supply
designed to meet short-term startup power demand as well as
steady state conditions.
Areca RAID controller has included the option for customer to
select the disk drives sequentially stagger power up value. The
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
SATA NCQ Support
HDD Read Ahead Cache
Stagger Power on
HDD SMART Status Polling
Controller Fan Detection
Auto Activate Raid Set
Capacity Truncation
HDD Read Ahead Cache
HDD Read Ahead Cache
Enabled
Disable Maxtor
Disabled
Enabled

Table of Contents