Areca ARC-1222 - 3.2 McBIOS RAID manager

BIOS CONFIGURATION
32
Areca Technology Corporation RAID Setup <V1.40, 2006/08/8>
ArrowKey Or AZ:Move Cursor, Enter: Select, **** Press F10 (Tab) to Reboot ****
Select An Adapter To Congure
( 001/ 0/0) I/O=28000000h, IRQ = 9
Use the Up and Down arrow keys to select the controller you want
to congure. While the desired controller is highlighted, press the
Enter key to enter the main menu of the McBIOS RAID manager.
3.2 McBIOS RAID manager
The McBIOS RAID manager is rmware-based and is used to con-
gure RAID sets and volume sets. Because the utility resides in
the SAS RAID controller rmware, operation is independent of any
operating systems on your computer. This utility can be used to:
• Create RAID sets,
• Expand RAID sets,
• Add physical drives,
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Quick Volume/Raid Setup
Verify Password
Note:
T he m an u fa c t ur e
default password is
set to 0000; this
p as s w or d c a n b e
modied by selecting
Change Password
in the Raid System
Function section.