BIOS CONFIGURATION
67
To disable the password, only press Enter key in both the “Enter
New Password” and “Re-Enter New Password” column. The ex-
isting password will be cleared. No password checking will occur
when entering the main menu.
3.7.5.4 JBOD/RAID Function
JBOD is an acronym for “Just a Bunch Of Disk”. A group of
hard disks in a RAID box are not set up as any type of RAID
conguration. All drives are available to the operating system
as an individual disk. JBOD does not provide data redundancy.
User needs to delete the RAID set, when you want to change the
option from the RAID to the JBOD function.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
SATA NCQ Support
HDD Read Ahead Cache
Stagger Power on
HDD SMART Status Polling
Controller Fan Detection
Auto Activate Raid Set
Capacity Truncation
JBOD/RAID Function
JBOD/RAID Function
JBOD
RAID
3.7.5.5 Background Task Priority
The “Background Task Priority” is a relative indication of how
much time the controller devotes to a rebuild operation. The
SAS RAID controller allows the user to choose the rebuild prior-
ity (UltraLow, Low, Normal, High) to balance volume set access
and rebuild tasks appropriately.
To Next Page
Loading...
