Areca ARC-1222 - Ethernet Address; View System Events

BIOS CONFIGURATION
76
3.7.6.6 Ethernet Address
Each Ethernet port has its unique Mac address, which is also
factory assigned. Usually, Ethernet address is used to uniquely
identify a port in the Ethernet network.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Ethernet Conguration
Ethernet Conguration
DHCP Function : Enable
Local IP Address : 192.168.001.100
HTTP Port Number : 80
Telnet Port Number : 23
SMTP Port Number : 25
EtherNet Address : 00.04.D9.7F.FF.FF
EtherNet Address : 00.04.D9.7F.FF.FF
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
View System Function
Time Device Event Type ElapseTime Errors
2007-1-1 12:00:00 ARC-1680-VO#00 Raid Powered On
2007-1-1 12:00:00 H/W Monitor Raid Powered On
2007-1-1 12:00:00 H/W Monitor Raid Powered On
3.7.7 View System Events
To view the SAS RAID controller’s system events information,
move the cursor bar to the main menu and select the “View
System Events” link, then press the Enter key. The SAS RAID
controller’s events screen appear.
Choose this option to view the system events information: Timer,
Device, Event type, Elapsed Time, and Errors. The RAID system
does not have a build-in real time clock. The time information is
the relative time from the SAS RAID controller powered on.