PU-4010 2-8
After completing the test conditions settings, read the following precautions before preparing
samples and carrying out testing.
2-5 Normal Measurement
• During sample preparation and testing, wear protective gloves to
prevent exposure to pathogenic microbes.
• Discard used samples, test strips and protective gloves in
accordance with local regulations for biohazardous waste.
Do not touch the portion where the test strip holder moves.
Touching there can cause injury.
IMPORTANT:
• Do not try to move or impact on the instrument. Doing so may cause the
instrument to malfunction, producing incorrect results, or may cause test strips to
jam.
• If an error code, e.g. “E001”, appears and measurement automatically stops in
progress, see “5-1. When an Error Occurs” on page 5-1 to clear the error. Then,
use a new
test strip to retry measurement.
To Next Page
Loading...
Need help?
General
