Arkray PU-4010 - Clearing All Results from Memory

PU-4010 3-6
All stored results can be cleared in a single operation. Please note that deleted data cannot be
recovered.
Display any of the existing results.
• See steps 1 and 2 in “3-3. Reviewing Results”
on page 3-4.
Press the button once.
• If the printer is attached, press the
button twice.
• The icon will blink.
Press the hyphen button four times.
• “ALL” will appear to indicate all results will
be cleared.
Press the button.
• This will clear all the existing results from memory.
• After completion, a short beep will sound and the standby screen will appear.
3-5 Clearing All Results from Memory
1
2
[
6
( )
]
[
6
( )
]
3
4
NOTE: The clear operation cannot be cancelled in progress.