Arkray PU-4010 - Transferring All Results to an External Device

PU-4010 3-8
All results in memory can be transferred to an external device connected to the instrument all
at once.
Display any of the results in memory.
• See steps 1 and 2 in “3-3. Reviewing Results”
on page 3-4.
Press the button twice.
• If the printer is attached, press the
button three times.
• The icon will blink.
Press the hyphen button four times.
• “ALL” will appear to indicate all of the results
will be transferred.
Press the button.
• The icon will light steadily to indicate that the results are being transferred to an
external device.
• After completion, a short beep will sound and the standby screen will appear.
REFERENCE: To cancel transmission, press the button. The instrument will transfer the
current result before completely stopping the operation.
3-7 Transferring All Results to an External Device
1
2
[
6
( )
]
[
6
( )
]
3
4