PU-4010 3-9
Use the following procedure to print an existing result in memory when the printer is attached
to the instrument. Make sure the printer is properly connected to an AC receptacle.
Display the result you want to print.
• See steps 1 and 2 in “3-3. Reviewing Results”
on page 3-4.
Press the button once.
• The icon will blink.
Press the button.
• The icon will light steadily to indicate that the result is being printed out.
3-8 Reprinting a Specific Result
1
2
3
NOTE: The print operation cannot be cancelled in progress.
To Next Page
Loading...
Need help?
General
