Arkray PU-4010 - Deleting a Specific Result from Memory

PU-4010 3-5
Unnecessary results can be manually deleted from the memory. Use the following procedure
to delete one result at a time. Please note that deleted data cannot be recovered.
Display the result you want to delete.
• See steps 1 and 2 in “3-3. Reviewing Results”
on page 3-4.
Press the button once.
• If the printer is attached, press the
button twice.
• The icon will blink.
Press the button.
• The result will be deleted from memory and the next result will appear. If there are no
more results, the standby screen will appear again.
3-4 Deleting a Specific Result from Memory
1
2
[
6
( )
]
[
6
( )
]
3
NOTE: The delete operation cannot be cancelled in progress.